Transform Rusted Surfaces Into a Solid Foundation
Oxidestroy Rust Converter is a powerful rust treatment solution that transforms rusted metal into a stable, paint-ready surface—overnight. Through a chemical reaction, it converts iron oxide (rust) into iron phosphate: a tough, blackened layer that enhances paint adhesion and long-term durability.
Simply apply Oxidestroy Rust Converter and Primer directly onto corroded surfaces to halt further rusting and prepare the area for painting. For optimal protection against future corrosion, follow up with 2KIND ASPS, or NuRoof Nano-Fibretech Roof and Wall Sealer.
Fast. Reliable. Built to last.
Oxidestroy Rust Converter and Primer
For heavily soiled surfaces, begin by applying a suitable degreaser to remove grease and dirt. Use a wire brush to eliminate any loose paint and flaking rust. Light surface rust does not need to be removed.
Apply the product directly to the metal surface using a brush, roller, broom, mop, or a low-pressure sprayer. Heavily rusted areas may require two applications for full effectiveness. Allow the product to cure overnight before proceeding with the application of an undercoat primer and final paint layers.
- Appearance: Clear, colourless liquid
- Odour: Low to no odour
- Solubility: Fully water-soluble
- Stability in Application: Remains stable when exposed to light
- Composition: Phosphoric acid and other proprietary ingredients
- pH Level: 1–2
- VOC Content: 1%
- Active Ingredients: Water, Phosphoric Acid, Surfactants
- Practical Coverage: Approximately 30m² per litre
- Shelf Life: Not applicable
- Flash Point: Non-flammable
- Warning: This product is a severe eye and skin irritant.
- In case of contact with eyes or skin, rinse immediately with clean water for at least 15 minutes. If irritation persists, seek medical attention.
- If swallowed, drink plenty of water. Do not induce vomiting.
- For detailed safety guidelines and first aid measures, please refer to the Safety Data Sheet (SDS).
The information contained in this Product Information Sheet is based on controlled laboratory testing and many years of practical field experience and is provided in good faith. However, no guarantee or warranty, express or implied, is given regarding product performance or suitability for any particular purpose.
Neither the manufacturer nor the supplier shall be held liable for any direct, indirect, incidental, or consequential loss or damage arising from the use or misuse of this product.
The manufacturer reserves the right to amend product specifications without prior notice as part of ongoing product development and improvement.
Transforms rusted metal overnight.
- Roofing materials
- Structural steel
- Pipes & plumbing fixtures
- Railings
- Garden equipment
- Garden furniture
- Tools
- Nails - screws - bolts
- Wheel barrows
- Metal gates
- Bicycles
- Ship hulls
The manufacturer warrants that the product conforms to its published specifications at the time of manufacture. This warranty is limited to a period specified for the individual product, calculated from the date of purchase, and is conditional upon correct storage, surface preparation, application, and maintenance in accordance with the manufacturer’s published guidelines.
Larik Solutions Pty Ltd acts solely as the supplier of this product and provides no additional warranty, express or implied. No warranty of merchantability or fitness for a particular purpose is given.
As application methods, substrate conditions, environmental factors, workmanship, and methods of use are beyond the control of both the manufacturer and Larik Solutions Pty Ltd, no responsibility can be accepted for results obtained or for any loss or damage, whether direct, indirect, incidental, or consequential, arising from the use or misuse of the product.
All performance data, coverage rates, and recommendations are provided in good faith and are based on internal testing and practical experience. Actual performance may vary depending on substrate type, surface preparation, application thickness, environmental exposure, and site conditions. Users must conduct their own tests to determine suitability for the intended purpose before full application.
By purchasing, using, or applying this product, the user acknowledges and agrees that:
-
The product is supplied as a protective coating or additive, and not as a certified or guaranteed system unless expressly stated otherwise in writing.
-
Any technical guidance, recommendations, or application advice provided by the manufacturer or Larik Solutions Pty Ltd is offered in good faith but does not constitute a guarantee of performance or outcome.
-
The user assumes full responsibility for verifying that the product is suitable for their specific application, substrate, and service conditions.
-
Neither the manufacturer nor Larik Solutions Pty Ltd shall be held liable for any direct, indirect, incidental, or consequential loss or damage, including but not limited to property damage, loss of use, equipment failure, or injury, arising from the use, misuse, or incorrect application of the product.
-
All risk associated with the use of the product rests entirely with the user, and use of the product constitutes acceptance of this indemnity in full.
-
