NuRoof Fibretech Bitumen

• Stir thoroughly before use.
• Apply using brush, roller.
• NuRoof Nano-Fibretech Bitumen is supplied ready for use and should not be diluted, as thinning may reduce the coating’s effectiveness.

Apply a generous coat to the surface in manageable sections. Allow 2–4 hours drying time between coats depending on ambient temperature, humidity, and film thickness.
For best results apply a minimum of 3 coats, and in some applications up to 4 coats, to ensure a continuous waterproof membrane.

• Cellulose fibre reinforced coating for enhanced durability
• Excellent adhesion to previously bitumen-treated surfaces
• Flexible film that assists in bridging micro-cracks
• Reinforces and protects existing waterproofing systems
• Weather-resistant protective barrier
• UV resistant and weather durable
• Suitable for roof and wall applications
• Easy application by brush, roller
• Low odour water-based formulation
• Acid resistant
• Quick drying - multiple coats can be applied in one day

NuRoof Fibretech Bitumen is suitable for use on properly prepared substrates including:

• Existing bitumen waterproofing membranes
• Bitumen-coated roofing surfaces
• Bitumen-treated parapet walls
• Concrete roofs previously sealed with bitumen products
• Roof repairs where bitumen treatments have been used
• Fibre cement roofing
• Cement-based roof and wall substrates

Typical spreading rate: ± 2 m² per litre
Coverage may vary depending on the porosity and condition of the substrate.

 

Resin Base -  Acrylic resin emulsion
Film Thickness -  80–100 microns per coat

Safety & Environmental Information

NuRoof Fibretech Bitumen is a water-based, non-flammable coating containing low levels of VOC in accordance with EU regulations.The product contains no toxic substances when used as directed.

 NuRoof Fibretech Bitumen is available in a full range of standard roof colours and can be tinted to match virtually any colour specification.
Standard roof colours include:

• Red
• Terracotta
• Charcoal
• Grey
• Black
• Brown
• Green
• White

Additional custom colours can be produced on request to suit specific project requirements.

Actual colours may vary slightly depending on substrate and application conditions.

Up to 10-Year Limited Product Warranty (subject to manufacturer’s terms and application conditions

The manufacturer warrants that the product conforms to its published specifications at the time of manufacture. This warranty is limited to a period specified for the individual product, calculated from the date of purchase, and is conditional upon correct storage, surface preparation, application, and maintenance in accordance with the manufacturer’s published guidelines.

Larik Solutions Pty Ltd acts solely as the supplier of this product and provides no additional warranty, express or implied. No warranty of merchantability or fitness for a particular purpose is given.

As application methods, substrate conditions, environmental factors, workmanship, and methods of use are beyond the control of both the manufacturer and Larik Solutions Pty Ltd, no responsibility can be accepted for results obtained or for any loss or damage, whether direct, indirect, incidental, or consequential, arising from the use or misuse of the product.

All performance data, coverage rates, and recommendations are provided in good faith and are based on internal testing and practical experience. Actual performance may vary depending on substrate type, surface preparation, application thickness, environmental exposure, and site conditions. Users must conduct their own tests to determine suitability for the intended purpose before full app

By purchasing, using, or applying this product, the user acknowledges and agrees that:

• The product is supplied as a protective coating or additive, and not as a certified or guaranteed system unless expressly stated otherwise in writing.

• Any technical guidance, recommendations, or application advice provided by the manufacturer or Larik Solutions Pty Ltd is offered in good faith but does not constitute a guarantee of performance or outcome.

• The user assumes full responsibility for verifying that the product is suitable for their specific application, substrate, and service conditions.

• Neither the manufacturer nor Larik Solutions Pty Ltd shall be held liable for any direct, indirect, incidental, or consequential loss or damage, including but not limited to property damage, loss of use, equipment failure, or injury, arising from the use, misuse, or incorrect application of the product.

• All risk associated with the use of the product rests entirely with the user, and use of the product constitutes acceptance of this indemnity in full.